Meet L4S, The New Network Standard You Might See In Use Soon
Low Latency, Low Loss, Scalable Throughput
The L4S standard was approved and published in January of this year, but as of yet we haven’t seen much use of it. This could change as it will speed up your internet experience once implemented by a site. In very basic terms this standard adds an indicator to packets which allows them to detect congestion. If a packet sits in a queue for longer than a set period of time, that indicator will report that the packet has experienced congestion.
If this happens on a network with the ability to read that indicator, it can then take steps to rectify the situation. In theory this could reduce buffering down to single-digit milliseconds if alternate paths exist. While L4S has been fully approved, the roll out is taking some time. Comcast is conducting field trials with Apple, Nvidia, and Valve with Apple adding beta support for L4S in iOS 16 and macOS Ventura. Windows should be able to incorporate it without any real work, the biggest challenge may be in the hardware. The story at Slashdot suggests that so far adoption is limited, and only the Xfinity 10G Gateway XB7 / XB8, Arris S33, and Netgear CM1000v2 gateway devices were mentioned as supporting L4S .
The story at Slashdot also has a link to a detailed look, if you grasp networking at a high level.
It's a new internet standard called L4S that was finalized and published in January, and it could put a serious dent in the amount of time we spend waiting around for webpages or streams to load and cut down on glitches in video calls. It could also help change the way we think about internet speed and help developers create applications that just aren't possible with the current realities of the internet.
More Tech News From Around The Web
- AMD thinks it can solve the power/heat problem with chiplets and code @ The Register
- Over 30% of Log4J apps use a vulnerable version of the library @ Bleeping Computer
- New York Joins IBM, Micron in $10 Billion Chip Research Complex @ Slashdot
- Next-Gen Broadcom PCIe Switches to Support AMD Infinity Fabric XGMI to Counter NVIDIA NVLink @ ServeTheHome
- The race between Intel, Samsung, and TSMC to ship the first 2 nm chip @ Ars Technica
- Toyota warns customers of data breach exposing personal, financial info @ Bleeping Computer
- Raspberry Pi 5 Goes Under The X-ray @ Hackaday
- Homey Pro review: A very particular set of home automation skills @ Ars Technica
- QIDI X-Plus 3 High Speed 3D Printer Review @ NikKTech
I believe its L4S. not LS4 https://www.ietf.org/archive/id/draft-ietf-tsvwg-l4s-arch-19.html
You are correct, thanks for catching that!
There is one thing I wonder about it, since it relies on the flag in a packet that automatically causes networking equipment that is aware of L4S to make adjustments such as reducing rates, can’t it be abused? For example,what is stopping someone from flooding a non-congested network with packets indicating that there is constant congestion that would it simply degrade performance for everyone, essentially amplifying an attack on the service?